Raymarine L750 Operations Instructions download pdf (Page 30)

L750 Fishfinder: Installation and Operation Handbook

Important! The L750 Fishfinder is sometimes used with the

Raymarine SL70 “Pathfinder” radar display. The two units have the

same case design. Each unit has a large connector on the rear of

the case. On the radar unit, this connector is used to bring in the

radar signals. On the Fishfinder, this connector is used for the

transducer cable. If you have installed the two units side by side, be

very careful not to attach the radar cable to the Fishfinder, or vice

versa. This can cause permanent damage to either unit. The cable

for the radar unit has white insulation.

Fig. 2-15 Installing Cable on Transom

Sidelooker Option

1. If the installation includes the optional Sidelooker transducer, there

will be two transducer cables. See Fig. 2-16. The cable from the

Sidelooker includes a “Y” connector.

2. Plug the cable from the depth transducer into the open end of the “Y”

connector.

Cable feed-thru

cap

Cable clamp

1" (25 mm)

Hull projections

Fiberglass: 1/4" (6mm)

Aluminum: 1/2" (13 mm)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 91 92

No comments

Raymarine L750 Operations Instructions Page 30