Raymarine Pathfinder Radar Specifications download pdf (Page 35)

Appendix: Connecting to Autopilots 29

Connecting to Autopilots

Installation instructions for T150/T400

Fluxgate compass

Leave the compass connected to course computer

FLUXGATE

inputs.

Installing the GyroPlus 2 unit

Follow the installation instructions for the GyroPlus 2 unit in Chapter 2.

CAUTION:

If you are using the Smart Heading System as the primary heading

reference for an autopilot, you must ensure that it receives power

(via SeaTalk or direct from the distribution panel) when the

autopilot is switched on.

Connecting the Rate Output

Connect the

RATE OUTPUT

on the GyroPlus 2 unit to the

RATE GYRO

inputs on T150/T400.

Calibration

You do not need to re-calibrate the autopilot fluxgate compass after

connecting the GyroPlus 2 unit to the T150/T400.

Note: If you need to calibrate the fluxgate compass for any reason in the

future, follow the procedures in the autopilot owner’s handbook.

GyroPlus 2 unit outputs

connect to

Course computer inputs

Rate output GROUND (GREY)

GREY

Rate output SIGNAL (YELLOW)

YELLOW

RED - DO NOT CONNECT

D5929-1

Screen

Yellow

Screen

Yellow

T150 or T400

course computer

81198_1.book Page 29 Monday, February 11, 2002 8:36 AM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

No comments

Raymarine Pathfinder Radar Specifications Page 35