Raymarine 45 STV User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Select the Master Control Function for Connected
Receivers
Dish Network MIM - Installation and User Manual10
Raymarine’s MIM allows you to select which receiver connected to the MIM will be
the “Master” receiver by pressing the “Select” button on the front panel of the MIM.
1. When you have a receiver connected to “TO RECEIVER SATELLITE IN”
number 1 of the MIM, the STB1 light turns on when you push the button the rst
time. If there are no other connections with other receivers, the STB1 light will
stay on even if the button is continuously pushed.
2. If you have other receivers connected, the STB light will move from STB1
through STB4 when the button is pushed. This light means the receiver using
this connection will be the “Master”. You can designate any receiver as the
Master using the “Select” button.
3. When using multiple MIMs, rst select a Master MIM. When the button on the
Master MIM is pushed, all lights on the other MIMs turn off because only one
MIM can be a Master. Once the Master MIM is selected, you can select STB1
through STB4 as the Master receiver using the “Select” button.
You simply choose your desired channels by using the receiver’s remote control
through the Master receiver. The Raymarine STV series antenna will automatically
switch to the appropriate satellite based on the last channel selected.
11SETUP THE ANTENNA CONTROL UNIT
1. Press YES to enter setup mode.
2. Press YES to set satellite pair.
3. Press YES to set triple satellite.
4. Set satellite A
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT A.
Press NEXT to show next satellite name.
5. Set satellite B
Press PREV to show previous satellite name.
Press SELECT to set chosen satellite to SAT B.
Press NEXT to show next satellite name.
Setup the Antenna Control Unit
In order to congure the correct set of satellites for MIM use, follow the instructions
below on the ACU.
ACU setup should be Triple Sat as follows:
1. Enter SETUP MODE and SET SAT PAIR MENU.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments