Raymarine DS500 Specifications download pdf (Page 26)

16 DS400 and DS500 Digital Fishfinders

2.7 Installing the E66062 (P58) Transducer

Please use the following installation instructions if your fishfinder is

equipped with a E66062 (P58) Multisensor Transom Mount Transducer.

Installation instructions for other transducer models are included with the

transducer.

Please read these instructions completely before proceeding with the

installation.

CAUTION: NEVER USE SOLVENTS

Cleaners, fuel, paint, sealants, and other products may contain strong

solvents, such as acetone, which attack many plastics greatly reducing

their strength.

Applications

• Not recommended for boats with large or twin screw inboard engine(s)

• Requires 89mm (3-1/2") of headroom to install

• Good operation up to 44kts (50MPH)

• Vertically orients sound beam on hull with deadrise angle up to 30°

• Adjusts to transom angles from 2° –22°

• Bracket protects multisensor from frontal impact only

Tools and Materials

Screwdrivers

Pencil

Safety goggles

Dust mask

Electric drill

Drill bits:

Bracket holes 4mm, #23, or 9/64"

Fiberglass hull chamfer, countersink, 6mm, or 1/4"

Transom hole (optional) 18mm, 11/16", or 3/4"

Cable clamp holes 3mm or 1/8"

Masking tape

Marine sealant

Straight edge

Zip-ties

Water-based antifouling paint (mandatory in salt water)

bereitgestellt von Busse-Yachtshop.de

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

No comments

Raymarine DS500 Specifications Page 26