Raymarine L470 Instruction Manual download pdf (Page 27)

Installation

When you attach the extension cable, be sure that the connections

are tight and watertight. Use Dow Corning DC-4 or an equivalent

sealing compound to protect the connector assemblies.

5. At the rear of the display unit, plug in the transducer cable using the

keyed connector.

Installing the Transducer Cable – Sidelooker Option

1. If the installation includes the optional Sidelooker transducer, there

will be two transducer cables. See Fig. 2-15. The cable from the

Sidelooker includes a “Y” connector, and is 12’ long (3.6 m).

2. Plug the cable from the depth transducer into the open end of the “Y”

connector.

Installing the Transducer Cable –

Installation with Separate Speed and Temperature Sensors

1. Optional depth-only and speed- and temperature-only transducers are

available for the FishFinder L470. In this optional configuration the

separate transducers are connected via a “Y” type receptacle cable

located on the optional speed- and temperature-only transducer cable.

Fig. 2-15

Cable for

Sidelooker

Transducer

Depth

transducer

Sidelooker

transducer

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 101 102

No comments

Raymarine L470 Instruction Manual Page 27