Raymarine Rudder Specifications download pdf (Page 23)

Chapter 3: Installation 13

7. Mount the assembled instrument, studs, bezel and gasket into the panel.

Secure from behind with the thumb nuts (5).

Flush mounting

The Flush Mounting Kit uses a low-profile bezel to reduce the fitted profile of the

instrument to approximately 0.25 in (6 mm) above the panel fascia.

Fitting the flush mount bezel

In order to flush-mount your ST60+ instrument, you must first replace the

standard bezel with the flush mount bezel as follows:

1. Hold the instrument in both hands with the display towards you.

2. Using both thumbs, gently press an upper corner of the instrument from the

bezel, then remove the bezel from the instrument. Retain the rubber keypad

which is released when the bezel is removed.

Surface mounting

412135 52

D8147-1

81266_1.book Page 13 Monday, December 5, 2005 9:28 AM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Raymarine Rudder Specifications Page 23