Raymarine Pathfinder Radar User Manual Page 221
- Page / 244
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Appendix B: Using the Auxiliary Junction Box B-5
Raystar 112, 105,
Apelco 182 and
182XT
Raystar 114 Combined GPS and Differential Beacon
Receiver
To connect your Raystar 114 Combined GPS and Differential Beacon
Receiver to your
hsb
2
display, cut off the 5-pin connector, strip back the
insulation on all the wires and connect to the Auxiliary Junction Box as shown
in the illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
Note: You can use the GPS Set-Up page to manually tune the Raystar 114. Re-
fer to Chapter 6 for details.
12V
Power
Supply
(fused)
From
Combined
GPS/DBR
sensor
Green
Red
Black
To Display Unit
SeaTalk Socket
D4301_1
Red
Black
White
Yellow
81186_2.book Page 5 Monday, December 17, 2001 8:35 AM
- PLUS Series 3
- LCD Display 3
- Owner’s 3
- Series LCD Display 5
- Owner’s Handbook 5
- Warranty 7
- Contents 8
- PLUS Series LCD Display 10
- Chapter 1: Overview 15
- How to Use This 16
- Handbook 16
- Terminology 17
- 1.1 General 18
- PLUS Display Units 19
- Operating Modes 20
- Chapter 1: Overview 1-7 21
- Heading and Position Data 23
- The Pathfinder Radar 24
- PLUS Display 24
- Radar Functions 26
- 1.3 The Chartplotter Display 27
- Chartplotter Display 28
- Chartplotter Functions 29
- Operating Controls 30
- 1.4 Operating Controls 30
- Moving the Cursor 31
- Dedicated Keys 32
- Database Lists 34
- 2.1 Introduction 35
- Switching the Display 36
- On and Off 36
- Changing the 40
- Lighting and Contrast 40
- 2.3 Controlling the Display 41
- Selecting the Mode of 42
- Operation 42
- ALARMS 45
- Chartplotter 46
- Customizing the 48
- Screen Presentation 48
- Radar Display Control 50
- Functions 50
- Hiding the Ship’s 52
- Heading Marker 52
- Moving Around the Chart 53
- Moving Around the 54
- 2.6 Typical Chart Scenarios 57
- Place and Goto a 58
- Waypoint 58
- Make and Follow a 60
- # 60
- Review Your Passage 62
- Displaying the Radar 64
- Radar & Chart 64
- 3.1 Introduction 67
- Range Control 68
- 3.2 Range Control 68
- 69
- Interpreting and 70
- Adjusting the Radar 70
- . t 71
- Identifying False Echo 72
- Adjusting Gain, Sea 74
- Clutter, Rain Clutter 74
- Changing the Targets 78
- Measuring Range and 80
- Bearing to Target 80
- Bearing Between 82
- Targets (FLOAT) 82
- Controlling VRM/EBL 84
- Placing a Guard Zone 86
- u 86
- Moving, Reshaping or 87
- Deleting a Guard 87
- Controlling Guard 88
- Zone Alarms 88
- 3.6 MARPA 89
- Introduction to 90
- Using MARPA 91
- 4.1 Introduction 95
- Heading Mode 96
- 4.2 Changing the Heading Mode 96
- Using Marks 98
- 4.3 Using Marks 98
- 4.4 Man Overboard (MOB) 99
- Cursor Echo 100
- 100
- 4.5 Cursor Echo 100
- 5.1 Introduction 101
- Using Chart Cards 102
- 5.2 Using Chart Cards 102
- Displaying Object 104
- Information 104
- Working with 108
- Waypoints 108
- 5.3 Working with Waypoints 108
- Placing a Waypoint 110
- Selecting a Waypoint 112
- Erasing a Waypoint 114
- Using the ST60 or 116
- ST80 Navigator 116
- Working with Routes 118
- 5.4 Working with Routes 118
- Creating a New Route 120
- Saving the Current 122
- Clearing the Current Route 123
- Displaying Route 124
- Using the Route List 126
- Editing a Route 127
- Reversing the Route 129
- Following Routes and 130
- Going to Points 130
- Target Point Arrival 132
- Stop Follow or Stop 134
- Displayed SeaTalk Waypoints 135
- Managing Database Lists 135
- Transferring 136
- Waypoints and 136
- Using Tracks 138
- 5.7 Using Tracks 138
- Clearing the Current 140
- SmartRoute 142
- 6.1 Introduction 143
- Measuring Distances 144
- Using the VRM/EBL 144
- Alarms and Timers 146
- 6.3 Alarms and Timers 146
- Man Overboard 148
- 6.4 Man Overboard (MOB) 148
- 6.5 Cursor Echo 149
- GPS Setup 150
- 6.6 GPS Setup 150
- Restart GPS 151
- D-GPS Set Up 151
- Data Log Mode 152
- 6.7 Data Log Mode 152
- 7.1 Introduction 155
- Changing the Set Up 156
- Parameters 156
- ENTER to clear the menu 157
- System Set Up 158
- 7.3 System Set Up Parameters 158
- Data Boxes 160
- Day/Night 161
- Variation Source 162
- NMEA Out Set Up 163
- Date and Time Settings 163
- GPS SOG/COG Filter 164
- 7.4 Radar Set Up Parameters 165
- Timed Transmission 166
- Bearing Alignment 167
- Antenna Size 167
- Send on HSB 167
- MARPA Set Up 168
- 7.5 MARPA Set Up Parameters 168
- 7.6 Advanced Settings 169
- STC Preset 170
- 7.7 Chart Set Up Parameters 171
- Plotter Mode 172
- Object Information 173
- Waypoint Options 173
- Radar/Chart Synch 173
- Datum Selection 173
- Position Offset 174
- 8.1 Introduction 175
- Planning the 176
- Installation 176
- Unpacking and 178
- Inspecting the 178
- Components 178
- Chapter 8: Installation 8-5 179
- Selecting the Display 179
- Unit Location 179
- 8.4 Cable Runs 181
- Inter-Unit Scanner 182
- Mounting the Display 184
- 8.6 System Connections 185
- Connection 186
- Display Unit 186
- f 188
- System Check 189
- Switch On and Initial Setup 189
- Radar System Checks 190
- Transmission Check 191
- EMC Conformance 194
- 8.8 Integrated Systems 194
- Connection 195
- Note: The 196
- and NMEA In 197
- SeaTalk® and NMEA 198
- Using the SeaTalk 202
- Auxiliary Junction 202
- Data Conversion 204
- 8.9 Integrated System Checks 205
- Transmitted Data 206
- 9.1 Maintenance 207
- Resetting the System 208
- 9.2 Resetting the System 208
- 9.3 Problem Solving 209
- How to Contact 210
- Raymarine (US) 210
- Worldwide Support 211
- Appendix A:Specification 213
- Series 7"LCD 214
- Color Displays 214
- Chartplotter Features 215
- Using the Auxiliary 217
- Junction Box 217
- Raystar 112, 105 218
- Apelco 182 and 218
- Raystar 120 WAAS 222
- Satellite Differential 222
- Receiver 222
- CUSTOMISE CHART, which 223
- CUSTOM soft key to 223
- C-MAP Chart Card 224
- Features 224
- Received and Transmitted 229
- SeaTalk and NMEA 230
- Data Received and 230
- Transmitted 230
- Heading Sensor 231
- G-Series Course 232
- Computer 232
- Appendix F: Abbreviations 233
- Index xiii 235
- PLUS Series CRT Display 236
- Index xv 237
- Index xvii 239
- Index xix 241
- Limited Warranty Certificate 243
Related products and manuals for GPS receiver Raymarine Pathfinder Radar
GPS receiver Raymarine ST80 User Manual
(15 pages)
(15 pages)
GPS receiver Raymarine RAYCHART 420D User Manual
(101 pages)
(101 pages)
GPS receiver Raymarine 320 User Manual
(139 pages)
(139 pages)
GPS receiver Raymarine 300 User Manual
(136 pages)
(136 pages)
GPS receiver Raymarine DSM30 User Manual
(34 pages)
(34 pages)
GPS receiver Raymarine L365 User Manual
(83 pages)
(83 pages)
GPS receiver Raymarine GPS Plotter User Manual
(131 pages)
(131 pages)
GPS receiver Raymarine ST8001 User Manual
(54 pages)
(54 pages)
© 2020, manymanuals.com. All rights reserved. | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals