Raymarine ST6001 User Manual download pdf (Page 14)

8 ST6001+ Smartpilot Controller Operating Guide

Note: The RESPONSE screen is set as a default data page (see SmartPilot

Commissioning Guide) so you can also access it by pressing disp and then

scrolling through the data pages.

2. Press -1 or +1 to change the response level.

3. Press disp or wait for 5 seconds to return to the previous display.

Adjusting performance – Non-G systems

Non-G SmartPilot systems have three different response levels:

• Response Level 1: AutoSeastate on (Automatic deadband)

The SmartPilot will gradually ignore repetitive boat movements and

only react to true variations in course. This provides the best compro-

mise between power consumption and course keeping accuracy

• Response Level 2: AutoSeastate off (Minimum deadband)

This setting provides tighter course keeping but will lead to increased

power consumption and drive unit activity

• Response Level 3: AutoSeastate off + yaw damping

This setting provides the tightest possible course keeping by introducing

counter rudder yaw damping You can adjust the counter rudder setting in

Dealer Calibration (see SmartPilot Commissioning Guide)

To make a temporary change to the response setting:

1. Display the RESPONSE screen by pressing the -1 and +1 keys together

2. Press -1 or +1 to change the response between levels 1 to 3.

3. Press disp or wait for 5 seconds to return to the previous display.

Note: You will lose these temporary changes to response level whenever the

system is powered off. You can make permanent adjustments in User Cali-

bration (see page 23).

D5452-2

Increase

response

Decrease

response

1 ... 13 14 15 ... 48

No comments

Raymarine ST6001 User Manual Page 14