Raymarine Radar Scanner User Manual download pdf (Page 32)

24 Pathfinder Radar Scanners

5. Referring to the following illustration, remove the securing nut

(1) from the watertight gland and grommet (2), where the inter-

unit cable (3) will enter the base.

1 Securing nut 2

2 Gland 3

3 Inter-unit cable 4

4 Eight-way plug 5

5 Eight-way socket 6

6 6

6 Power cores (2 or 4)

7 Terminal clamp 8

8 8

8 Screwdriver 9

9 9

9 Cable clamp 10

1010

10 Cable clamp screws 11

1111

11 Ferrite clamp

6. Slide the gland nut onto the inter-unit cable (3), and insert the

cable, still covered by its protective sleeve, through the gland into

the base.

7. Cut and remove the protective sleeve to expose the 8-way plug (4)

and power cores (6).

8. If the scanner is connected to an HSB Series Pathfinder Radar dis-

play, fit the ferrite clamp (11), supplied loose with the display

unit, as follows:

D3230-4

White wire

154_4.book Page 24 Wednesday, October 25, 2000 3:02 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 65 66

No comments

Raymarine Radar Scanner User Manual Page 32