14 SeaTalk
ng
Reference Manual
Making connections
Make each SeaTalk
ng
connection as demonstrated in
Figure 2-4
.
Figure 2-4 Connecting cables
Running cables
When running SeaTalk
ng
cables, always do so in accordance with the following
guidelines:
• Do not run cables where they are likely to be easily damaged.
• If a cable has to be fed through the deck, always use a proprietary deck gland.
• Where cables are fed through holes (in bulkheads etc), always use the
appropriate grommets to prevent chafing.
• Secure long cable runs so they do not present a hazard.
• Do not position cable connectors in bilges.
3. Rotate collar (2 clicks) until it
snaps into the LOCKED
position (almost one
quarter turn)
D10223-1
1. Rotate collar to UNLOCKED
position (so molded arrows
are aligned)
2. Ensure cable end connector is
correctly oriented, then fully
insert
81300_1.book Page 14 Tuesday, May 22, 2007 2:53 PM
Comments to this Manuals