Raymarine ST60 Specifications download pdf (Page 51)

Calibration 39

Leaving Intermediate calibration

Holddownthedepth and speed keys for 2 seconds,tosave your settings,

exit Intermediate calibration and resume normal operation.

4.4 Dealer calibration

The Dealer calibration procedures enable the following parameters to be

set:

• User calibration on/off.

• Speed response.

• Depth response.

• Boat show mode on/off.

Dealer calibration also gives access to the Factory defaults screen. This

enables you to re-apply the factory settings if you want to reset the

instrument to a known operating condition.

To commence Dealer calibration, hold down the

depth and speed keys

together for approximately 12 seconds, to select the Dealer calibration

entry page (see Dealer calibration diagram). Then press the

trip and

reset keys together, to enter the calibration screen sequence.

Use the depth key to move from screen to screen and the trip or the rest

key to set the required values at each screen.

User calibration on/off

Press either the trip or reset key to toggle the User calibration on or offas

required. Withoff selected, User calibration and Intermediate calibration

are both disabled.

Response settings

The response values for both SPEEDand DEPTH determine the frequency

at which information is updated. A low number provides a smooth

response and a high number a much livelier update.

Use the

trip (decrement) and reset (increment) keys to set the required

value. Response values are from 1 to 15.

81040_1.book Page 39 Thursday, November 7, 2002 10:21 AM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

Raymarine ST60 Specifications Page 51