Raymarine NMEA BRIDGE Specifications Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
S e a T a l k < - > N M E A
B r i d g e
Configuration Id's
Function
ID
Value
0 1 = Send out every incoming SeaTalk datagram as "$STALK....." to NMEA
0 = Do not generate $STALK,xx,yy sentence for each incoming SeaTalk
datagram If you don’t really need this function – better switch if OFF.
It causes additional load on the NMEA Bus.
1 Set NMEA port baudrate
1 = 300 baud
2= 600 baud
3= 1200 baud
4 = 2400 baud
5 = 4800 baud ( Default )
6 = 9600 baud
7 = 19200 baud
8 = 38400 baud
any other value defaults to 4800 baud
Baud rate is changed at next start of the converter
Baud rate of the USB port is currently set fixed to 4800 Baud.
2+3 Prefix for generated NMEA sentence - Character 1+2
Every NMEA sentence generated from the system begins with this two
letters
Default = “II” ( Integrated Instrumentation )
WARNING: You have to enter the ASCII value of the character, not the
character itself.
Example : To set character 1 to “I” and character 2 to “A”
$SNBSE,2,73 ( Character “I” is a 73 in ASCII )
$SNBSE,3,65 ( Character “A” is a 65 in ASCII ) See ASCII table
4 1= Echo every incoming NMEA sentence to NMEA Out port
2= Echo every incoming NMEA sentence to USB port
3= Echo every incoming NMEA sentence to USB port and NMEA port
0 = Do not echo incoming NMEA sentences
5 N.A:
6 1 = Send $IIVHW sentence when new data from SeaTalk arrives
0 = Do not send $IIVHW sentence
7 1 = Send $IIHDM sentence when new data from SeaTalk arrives
0 = Do not send $IIHDM sentence
8 1 = Send $IIMWV sentence when new data from SeaTalk arrives
0 = Do not send $IIMWV sentence
9 1 = Send $IIDBT sentence when new data from SeaTalk arrives
0 = Do not send $IIDBT sentence
10 1 = Send $IIMTW sentence when new data from SeaTalk arrives
0 = Do not send $IIMTW sentence
11 1 = Send $IIVLW sentence when new data from SeaTalk arrives
0 = Do not send $IIVLW sentence
12 1 = LCD light on/off is sent to SeaTalk?
0 = Do not send light on/off to SeaTalk
SeaTalk NMEA Bridge 128SD Sw Version 3.01 Page 22 of 28
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments