Raymarine Ray49E User Manual download pdf (Page 53)

Kapittel 4: Menyoppsett 53

ATIS Function

This operation enables or disables the ATIS feature in the radio. This feature

accommodates users who travel outside the inland waterways and wish to

disable the ATIS function at that time.

Merk:

If you purchased your Ray49E to include use on the inland waterways of the con-

tracting governments of the “Regional Arrangement Concerning the Radiotelephone Ser-

vice on Inland Waterways”– also known as the Basel Agreement– your radio has been

programmed by your dealer to include ATIS. If ATIS is enabled, certain programming steps

have been implemented to protect the integrity of this agreement, including the blocking

of DSC functions when ATIS is active.

When ATIS is enabled, the following occurs:

• DSC functions are disabled.

• Dual Watch, Tri Watch and all Scan functions are disabled.

• The following International Channels are limited to 1 watt output power:

6, 8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, 77 (and 31, if enabled).

To enable/disable ATIS:

1. From the Main Menu item, point to ATIS OPS.

2. Press

CH/OK to select. The ATIS OPS menu items appear with the arrow point-

ing to MY ATIS ID.

3. Rotate the

CH/OK knob until the arrow points to ATIS FUNC.

4. Press

CH/OK to select. You are prompted to set the ATIS function ON or OFF.

5. Rotate the

CH/OK knob until the arrow points to ON.

6. Press

CH/OK to select. A message appears warning you that when ATIS is

activated, DSC functions are disabled.

7. Press in

CH/OK to accept.

• If set ON, the ATIS icon appears and DSC functions are disabled.

• If set OFF, the ATIS icon disappears and DSC functions are enabled.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 111 112

No comments

Raymarine Ray49E User Manual Page 53