Raymarine ST60 Specifications download pdf (Page 23)

Chapter 3: Installation

This chapter describes how to install the ST60+ Depth instrument, and associated

depth transducer. The transducer is fitted in the hull of the vessel and is connected

by cable to the rear of the instrument. The actual type of transducer depends on

the type of hull in which it is to be installed.

For advice, or further information regarding the installation of this equipment,

please contact the Raymarine Product Support Department or your own National

Distributor.

3.1 Planning your installation

Before starting the installation, spend some time considering the best positions

for both transducer and instrument, such that the

Site Requirements

and the

EMC installation guidelines

(below) are satisfied.

Site requirements

Transducer

The transducer types required for the various hull types are as follows:

2.94 in (75 mm )

diameter

0.19 in (5 mm)

2.94 in (75 mm )

diameter

2.0 in (51 mm )

diameter

3.75 in (95 mm )

D8685-1

Depth transducer dimensions

81262_2.book Page 11 Monday, December 5, 2005 9:02 AM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

No comments

Raymarine ST60 Specifications Page 23