Raymarine ST60 Specifications download pdf (Page 42)

30 ST60+ Depth Instrument Owner’s Handbook

Shallow alarm lock

When set to On, the shallow alarm lock prevents inadvertent alteration to the

shallow depth alarm setting.

Note:

The procedure for setting alarm level levels is given in Chapter 1, Operation.

Pop-up pilot

Switches the pop-up pilot function on and off.

Leaving User calibration

Hold down the depth and alarm buttons for 2 seconds to save your settings, exit

User calibration and resume normal operation.

4.3 Intermediate calibration

Intermediate calibration enables you to:

• Check the instrument software version.

• Set the instrument status - either MASTER or REPEATER .

To access the Intermediate calibration screens, hold down the depth and alarm

buttons for approximately 4 seconds. the software version screen is displayed.

To set the instrument status:

1. Press the

depth button to select the Instrument status screen.

2. Press the

offset and reset buttons simultaneously to enter adjust mode,

then press either

offset or reset to set the required status.

Note:

You must not allocate more than one MASTER depth instrument in any system.

Intermediate calibration

Software

version

Instrument

status

Hold down for approximately 4 seconds

depth alarm

(or REPEATER)

depth

D8166-1

81262_2.book Page 30 Monday, December 5, 2005 9:02 AM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

No comments

Raymarine ST60 Specifications Page 42