Raymarine St290 Specifications download pdf (Page 161)

7-2-4 Section 7: System Setup

ST290 Instrument System Owner’s Handbook

2.2 Setting display response and update

The DISPLAY RESPONSE setup chapter enables you to set the display

responses and update rate. To do this:

1. Select the DISPLAY RESPONSE setup chapter

2. Use the button to move to the required page.

3. Carry out theSetting response values and Setting update rate proce-

dures (below).

Setting response values

To set the display responses (see Figure 2-4 ):

1. Select the page showing the data list for response setting.

Figure 2-4: Display response

2. Use the or button to highlight the parameter you want to set.

3. Hold down the button for 1 second to enter Edit mode. The high-

lighted value flashes to indicate you can adjust it.

4. Use the or button to set the response you want. Available values

are from 1 to 15, (1 sets the slowest response and 15 the fastest).

5. Hold down the button for 1 second to save the value you have set.

6. Repeat steps 1 to 5 for all parameters you want to set.

Setting update rate

To set the display update rate (see Figure 2-5 ):

1. Select the DISPLAY UPDATE page. As the update rate is the only edit-

able value, it flashes to indicate it is in Edit mode.

2. Use the or button to set the update rate you want. Available

update rates are from once a second (EVERY 10 X 100MSEC) to ten

times per second (EVERY 1 X 100MSEC). The update rate of the large

D5945-1

81183_2 S7.book Page 4 Wednesday, May 7, 2003 1:52 PM

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 298 299

No comments

Raymarine St290 Specifications Page 161