Raymarine ST70 Installation Guide Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
Chapter 2: Commissioning Procedures 19
3. Use
<
or
>
to scroll to the
Calibrate Vane
option.
4. Press
ENTER
to select the
Calibrate Vane
start
screen.
5. Keeping the boat speed below 2 knots and
observing the screen, turn the boat in circles,
then press
ENTER
to start the calibration.
6. Observe the
Calibrate Vane
run screen and
continue turning the boat.
If the boat speed is too high during calibration,
the instrument displays a
Slow down
message.
If this happens, reduce your speed. Calibration
completes automatically.
7. When calibration is complete, the
Wind
transducer setup menu is displayed.
Alignment
To carry out the wind vane alignment:
1. With the
Wind
transducer setup menu
displayed, use
<
or
>
to scroll to
Align Vane
, then
press
ENTER
to display the
Align Vane
screen
2. Sail the boat directly into the wind, then press
ENTER
to accept the alignment and return to
the
Wind
transducer setup menu.
Note: On a calm day, motor fast enough to create ‘your
own wind’.
D10061-1
Press ENTER to select.
Wind
Calibrate Vane
i
Raymarine
Serial no. 100030
D10060-1
i
Move in a slow circle, below 2Kts.
Watch for 'too fast' on display.
Press ENTER to continue
Calibrate Vane
D10322-1
i
Keep turning....
Press CANCEL to stop
Calibrate Vane
35%
D10073-1
i
Steer your boat directly into the
wind, then press ENTER.
Press ENTER to accept
Align Vane
AWA 105° P
81284_1.book Page 19 Friday, May 4, 2007 7:29 AM
www.Busse-Yachtshop.de [email protected]
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Comments to this Manuals

No comments