Raymarine ST60 Specifications download pdf (Page 47)

Chapter 4: Calibration 35

Set temperature units

Select either °C or °F, as required.

Temperature calibration

Set the display to show the current water temperature.

Timer alarm buzzer

Switches the count-up and race-start timer audible alarm on the ST60+ Tridata

instrument being calibrated, on and off.

Leaving User calibration

Hold down the depth and speed buttons for 2 seconds, to save your settings,

exit User calibration and resume normal operation.

4.3 Intermediate calibration

Intermediate calibration enables you to:

• Check the instrument software version.

• Check the instrument status - either YES (master) or NO (repeater). You can

also change the depth status, as required. This feature is particularly useful in

preventing interference when using another product (e.g. a fishfinder) that

operates at 200 kHz.

• Carry out a calibration run over a measured distance to ensure accurate speed

readings.

To start Intermediate calibration, hold down the

depth and speed buttons for

approximately 4 seconds (see

Intermediate calibration

flow chart).

(or NO for repeater)

Software

version

Instrument

status

Intermediate calibration

Hold down for approximately 4 seconds

depth speed

and

speed

D8180-1

Carry out speed calibration

as detailed in

Speed calibration - sheets 1 & 2

81263_2.book Page 35 Monday, December 5, 2005 9:08 AM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 61 62

No comments

Raymarine ST60 Specifications Page 47