Raymarine ST60 Specifications download pdf (Page 50)

38 ST60+ Tridata Instrument Owner’s Handbook

5. At the end of the outward leg, press the speed button again so that:

•The text rEtrn is flashing at the bottom of the screen.

• The displayed distance freezes. Note that this value may not be the same

as the measured distance due to errors introduced by tidal flow.

6. Turn the vessel round, start the return leg and as you do so, press the

speed

button so the rEtrn legend stops flashing and the displayed value incre-

ments.

7. At the end of the return leg, press the

speed button to end the calibration

run. At this point:

•The text Strt 2 alternating with the new calibration factor is displayed

at the bottom of the screen.

• The displayed distance freezes. This value should be very close to the

actual (measured) distance of the calibration run.

8. Carry out one of the following actions:

• If you are satisfied with the results of the first calibration run, press the

depth and speed buttons together, to store the new calibration factor,

exit speed calibration and return to the Instrument status screen.

Speed calibration, sheet 2

Complete the

outward leg of

the second cal run

Complete the

return leg of

the second cal run

speed

At the start of the

return leg press

At the end of the

outward leg, press

At the end of

the return leg

press

depth

Press

speed

to save the

cal factor

Exit to Instrument

status display

(Intermediate

calibration)

speed

From sheet 1

Speed

calibration is

now complete

D8182-1

81263_2.book Page 38 Monday, December 5, 2005 9:08 AM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 61 62

Comments to this Manuals

No comments

Raymarine ST60 Specifications Page 50

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors Raymarine ST60