Raymarine GyroPlus Yaw Sensor Setup Guide download pdf (Page 25)

Chapter 2: Using Track mode 19

Waypoint arrival

As your vessel nears the waypoint, an audible Waypoint Advance warning sounds

and a next waypoint (

NEXT WPT)

screen is displayed. This shows the bearing to the

next waypoint.

To steer to the next waypoint in the route

When the Waypoint Advance warning sounds, the SPX-5R Drive system suspends

Track mode and maintains the current boat heading.To advance to the next waypoint:

1. Check that it is safe to turn onto the new track.

2. Press the

track

button, to cancel the Waypoint Advance warning and steer the

boat to the next track leg.

Note: If you do not press

track

to accept the Waypoint Advance, the SPX-5R Drive system will

maintain the current heading and continue to sound the warning.

To skip a waypoint (SeaTalk chartplotters only)

If you want to advance to the next waypoint before you have arrived at the current

target waypoint, you can skip the current waypoint by pressing

track

for 1 second.

The display will then show a Waypoint Advance screen for the next waypoint. Check

it is safe to turn, then press

track

to turn the boat towards the next waypoint.

WARNING: Ensure safe navigation

Before changing course, always ensure it is safe to do so.

Always be aware of the relative wind angle, especially when

turning away from the wind.

TRUE

Target

Waypoint

New target

waypoint at 270˚

D10693-1

Next target

Waypoint at 270˚

Waypoint arrival Waypoint advance

Waypoint arrival and advance

Old target

Waypoint

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Comments to this Manuals

No comments

Raymarine GyroPlus Yaw Sensor Setup Guide Page 25

Comments to this Manuals

Related products and manuals for Navigators Raymarine GyroPlus Yaw Sensor