Raymarine ST1000 Plus Specifications download pdf (Page 42)

40 ST1000 Plus & ST2000 Plus Tiller Pilots

3. Mark the bolt holes on the mounting ring and then drill three 6 mm (

in)

diameter holes.

4. Bed the mounting ring on a thin coat of silicon sealant.

5. Use three 6 mm (

in) diameter bolts, nuts and washers to attach the mount-

ing ring to the backing plate (with the backing plate on the other side of the

mounting surface, as shown above).

6. Screw the mounting socket firmly into place.

Note:

When the tiller pilot is not in use, you can unscrew the complete rod assembly to

leave the cockpit unobstructed.

Alternative tiller pins

Your Raymarine dealer can also supply the following alternative lengths of tiller

pin for other non-standard installations.

4.3 Cabling and socket installation

Both power and data are supplied to the tiller pilot via a waterproof plug and

socket. The plug comes ready assembled and the socket can be mounted in the

cockpit area adjacent to the tiller pilot.

Description Size Part no.

Small threaded tiller pin 25 mm (1.0 in) D014

Extra length tiller pin 72 mm (2.8 in) D020

Extra length threaded tiller pin 72 mm (2.8 in) D021

D305-3

+12 V DC (brown, pin 1)

0 V (blue, pin 2)

NMEA + (white, pin 6)

NMEA - (green, pin 5)

SeaTalk data (yellow, pin 4)

81130_6.book Page 40 Wednesday, March 8, 2006 3:12 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

No comments

Raymarine ST1000 Plus Specifications Page 42