Chapter 2: Using the Tiller Pilot 7
Chapter 2: Using the Tiller Pilot
2.1 Overview
WARNING:
Passage making under autopilot control is an enjoyable
experience that can, if you are not careful, lead to the relaxation
of the permanent watch. Always maintain a permanent watch no
matter how clear the sea may appear to be.
• The tiller pilot always powers up in Standby mode (indicated by a flashing ‘C’
alongside the boat’s current compass heading).
• The tiller pilot is controlled using simple push-button operations, all of which
are confirmed with a short beep. In addition to the main single key functions,
there are several dual key operations.
• To select automatic steering:
• steady the boat on the required heading
• place the pushrod over the tiller pin (if necessary, extend or retract the
pushrod using the
-1, +1, -10, and +10 keys)
• press
auto: the display will then show an ‘A’ alongside the current head-
ing
• To return to manual steering at any time:
• press
standby
• remove the pushrod from the tiller pin
• You can use the
-1, +1, -10, and +10 keys to make course changes when the
boat is under autopilot control.
D355-2
81130_6.book Page 7 Wednesday, March 8, 2006 3:12 PM
Comments to this Manuals