the line and whether the vessel is closing, parallel-
ing, or opening away from the line. A bit of the
vessel track history appears behind the boat symbol.
Up ahead, the
waypoint
destination is in view. If
the destination is identified by a symbol or name,
the first character will be blinking near the target
area. Nearby
waypoint
symbols ( two closest to
vessel) may be in view on the screen if they are within range. If a route plan
is ON, the direction of the next leg is indicated by the slant of the track beyond
-
the destination symbol.
The various
CD1
screens combine navigation re-
adouts with the active
CD1
graphic display. If for
some reason a
waypoint
is not selected, the BRG and
DTG readouts will be blank,
WPT NO
DEST
appears
in the message window, and the destination target
symbol is not displayed.
3.5.5 Plot Display Mode
One of the most useful modes is the Tracking Plotter or Plot mode.
Using
this mode you can record and retrace your vessels’ track to your best fishing
spots...and back home again. The Tracking Plotter also displays the symbols
or first letters and marks of waypoints and events used to mark your favorite
fishing locations on the plot screen.There are two Plot displays. The Plot
Mode is activated by pressing the
IpLoT/
key.
The Plot 1 display appears as shown in the figure.
The location of your vessels’ position is indicated by
a blinking
“+“.
In addition, waypoints, event marks,
and the memorized vessel track line that is within the
range of the plot area will be shown, as well as your
current fishfinding information.
OPERATION 3-13
Comments to this Manuals