Press
theI=j
key puts the screen into an Edit condition so you can
INSERT
or
DELETE
waypoints.
Notice that two
softkeys
ILEG
and
m
(insert) appear on the screen.
To INSERT a Waypoint
For example; to insert a new
waypoint
between waypoints #006 and #036,
press(LEGI[
and
them[arrow
until you see the leg containing Fr 006/to
036. If this is where you would like to
INSERT
the new waypoint, Press the
msoftkey
Type the new
waypoint
number ( # 002) and
pressF1
The
new waypoint will now appear between 006,002,036.
To DELETE a
Waypoint
To delete a
waypoint
from a route plan, press
thelLEG1
key until the leg
where the
waypoint
shouid be deleted is displayed. For example; to delete
waypoint
SO36
in the example above,
pres~~~until
you see Fr 006/ to
036. Then
pressllto
EDIT and
pressmqagain
to
DELE
TE
#036.
The
FROM
waypoint 036 will disappear the route string will be joined less
waypoint
036 ( deleted from route; not from waypoint memory).
B
J
When you are finished,
press
theI-
key to end the editing session and return to the Display
mode. If you press
the[CLEAR[key
here (which is normally done on other
menus) you will accidently remain in the EDIT screen and continue deleting
waypoints from the route against your will.
3.9.4 Erasing Route Plans
To
ERASE
a route plan, select the Route mode with
thevlkey.
Press
wqon
the ROUTE MODE
Directory. Type in the route number to be erased
and then press the
#
ERASE ROUTE
softkey.
The
message
WJRE?
P
R
ESS
ENTER"
will appear. To
ERASE
the route,
presdm{
If you have a change
of heart,
pressjjlto
abandon the
E
R
ASE
request and return to the Display
mode.
3.10
TheplKey
One of the smallest, but most important keys on the NAV 398 is
the-1
key. This key controls access to the screens which set up the operating
parameters for the sensors, the display system, and for the navigation
calculations and readouts,
In the Menu pages you will find that the operations are very simple and
direct and the most difficult task will be to remember which menu holds the
OPERATION 334
..-
.
.
-.
.
_,._
_
Comments to this Manuals