Raymarine FishFinder L265 User Manual download pdf (Page 20)

PWR

PA GE

265

L265

Raymarine

The angle of

the display

can be changed.

To release the

display from

the base,

press on the

right and left

sides until you

hear the clicks.

Slide the

display out of

the bracket.

The display can

be turned from

side to side.

Fig. 2-9

Installation

on Bracket

Dismounting the Display Unit

See Fig. 2-9. To release the display from the bracket, press and hold

down the left and right sides. You will hear an audible “click,” and the

bracket will slide out.

Mounting the Display Unit – Flush Mount

In order to do this installation, you will need the optional flush mounting kit

(part no. M78931). See Fig. 2-11.

1. Select a mounting location on the dashboard or control panel.

Choose a clear, flat area at least 6" x 6" (152 mm x 152 mm). Be sure

you will also have at least 6" (152 mm) of clearance behind the area

where the display unit will be mounted. It is a good idea to drill a

small pilot hole in the center of the mounting area. Be sure there are

no hidden electrical wires or other items behind the point where you

plan to mount the display unit.

2. A mounting template is supplied with the flush mounting kit. Tape this

over the selected location on the panel and trace around the edges.

3. Make the cutout for the display. Drill a series of 1/2" (13 mm) holes at

the points shown around the edges of the cutout area.

Installation

1 ... 19 20 21 ... 79

Comments to this Manuals

No comments

Raymarine FishFinder L265 User Manual Page 20

Comments to this Manuals

Related products and manuals for Sports and recreation Raymarine FishFinder L265