Raymarine GyroPlus Yaw Sensor Installation Manual download pdf (Page 20)

12 ST70 Pilot Controller Reference Guide

Display Response

The response setting determines the rate at which data readings update. You can

adjust the response at each pilot head to best suit the conditions under which you are

operating. You can independently adjust the response at each pilot head for individual

data types:

• Speed

•Depth

• Heading

• Wind Speed

• Wind Angle

•

1. Use < and > to scroll to the Response box and

press

ENTER

2. Use < and > to scroll to the response parameter

you want to change.

3. Use < and > to increase or decrease the setting

as required, from 1 to 15, where 1 is slow and 15

is fast. You may have to experiment to find out

the appropriate response level for your vessel.

4. Press

ENTER

to accept the new value and exit,

CANCEL

to exit without making any change.

Autopilot calibration

Refer to the ST70 Autopilot Controller/SmartPilot X Commissioning Instructions.

Diagnostics

Use < and > to scroll to the Diagnostics box and press

ENTER

Press ENTER to select.

Display Settings

Response

D10822-1

Select display response.

Press ENTER to select.

Response

Speed

D10836-1

Press ENTER to accept.

Speed

D10837-1

< & > adjust response level.

CANCEL exits without saving.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comments to this Manuals

No comments

Raymarine GyroPlus Yaw Sensor Installation Manual Page 20

Comments to this Manuals

Related products and manuals for Navigators Raymarine GyroPlus Yaw Sensor