16 ST70 Pilot Controller Reference Guide
Wind Trim
Wind Trim controls the sensitivity of the pilot when
steering in wind vane mode.
1. Press
MENU
, then use < and > to scroll to
Autopilot Calibration and press
ENTER
.
2. Use < and > to scroll to
Vessel Settings
and
press
ENTER
.
3. Use < and > to scroll to
Sailboat Settings
and
press
ENTER
.
4. Use < and > to scroll to
Wind Trim
and press
ENTER
.
5. Use < and > to increase or decrease the auto
tack delay.
6. Press
ENTER
to accept the change or
CANCEL
to exit without making any changes.
Wind Selection
You can specify whether the wind source is to be
true or apparent when steering in wind vane mode.
1. Press
MENU
, then use < and > to scroll to
Autopilot Calibration and press
ENTER
.
2. Use < and > to scroll to
Vessel Settings
and
press
ENTER
.
3. Use < and > to scroll to
Sailboat Settings
and
press
ENTER
.
4. Use < and > to scroll to
Wind Selection
and
press
ENTER
.
5. Use < and > to switch between True and Appar-
ent.
6. Press
ENTER
to accept the change or
CANCEL
to exit without making any changes.
Press ENTER to select.
Sailboat Settings
Wind Trim
10853-1
Press ENTER to select.
Wind Trim
i
D10852-1
Set the response to wind
direction changes
5
Press ENTER to select.
Sailboat Settings
Wind Selection
D10855-1
Press ENTER to select.
Wind Selection
i
D10854-1
Select wind source.
True
Comments to this Manuals