Raymarine 150/400 Installation Manual download pdf (Page 56)

48 SmartPilot Commissioning Guide

Drive type

The drive type setting controls how the SmartPilot drives the steering

system. The drive type should be set when commissioning the SmartPilot

(see page 25).

Align rudder

Use this setting to calibrate the rudder bar display. This is usually set as part

of the commissioning process (see page 26). This screen also appears in the

Seatrial Calibration grouping.

Drive Drive Type Setting

Drive Type 3

•Linear

•Rotary

Typically found on yachts

• I/O (stern)

Found on Powerboats

Drive Type 4

• Hydraulic reversing pump

Used on yachts and powerboats with

hydraulic steering

Drive Type 5

• Constant running hydraulic pumps.

Controlled by solenoid valves

Found on light commercial and larger boats

(S2 and S3 systems only)

Screen Text Range

ALIGN RUDDER S1 Systems:

S2 & S3 Systems:

-9° to +9° in 1° steps

-7° to +7° in 1° steps

D6404-1

D6405-1

D6406-1

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

No comments

Raymarine 150/400 Installation Manual Page 56