Raymarine 150/400 Installation Manual download pdf (Page 61)

Chapter 3: Adjusting SmartPilot Settings 53

AutoRelease (I/O drives only)

Only available if vessel type = STERNDRV.

AutoRelease provides emergency manual over-ride in situations when you

need to avoid an obstacle at the last moment. If the vessel type is set to STERN

DRV (I/O or stern drive), you will see the AutoRelease screen (AUTO RELSE)

set to ON as a default.

AutoTack angle

Note: Only available if vessel type = SAIL BOAT.

The AutoTack angle is the angle through which the boat will turn when you

select an automatic tack.

Gybe inhibit

Note: Only available if vessel type = SAIL BOAT.

With gybe inhibit on:

• you will be able to perform an AutoTack into the wind

• to prevent accidental gybes, the SmartPilot will prevent the boat from

performing an AutoTack away from the wind

With gybe inhibit off, you can perform an AutoTack into or away from the

wind.

Screen Text Range

AUTO RELEASE ON = AutoRelease on (default)

OFF = AutoRelease off

Screen Text Options

AUTO TACK 40° to 125° in 1° steps

Screen Text Options

GYBE STOP On (Default) = Gybe inhibit on (gybes prevented)

OFF = Gybe inhibit off (gybes permitted)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

No comments

Raymarine 150/400 Installation Manual Page 61