Raymarine 150/400 Installation Manual download pdf (Page 27)

14 ST6001+ Autopilot Control Unit - Owner’s Handbook

2 Basic Operation

2.3 Adjusting display/keypad lighting

Note: When the display lighting is off, the control unit illuminates the

keys at a courtesy level.

To adjust the display and keypad lighting:

1. Press

disp for 1 second from any mode to access the LAMP screen

and turn on the lights.

2. Press the

disp key to cycle through the possible illumination

settings:

LAMP 3 (the brightest setting), LAMP 2, LAMP 1, OFF,

LAMP 1, LAMP 2, LAMP 3

and so on:

• as you change the setting, the illumination on any other

SeaTalk instruments or control units will also change

3. The display automatically returns to the previous mode if you do

not press a key for 10 seconds:

• if you press another mode key within 10 seconds you will

select the mode assigned to that key (for example:

auto

selects Auto mode, standby selects Standby mode)

Note: You can also adjust the lighting level from any other SeaTalk

instrument or control unit.

Note: When you switch off the unit you lose any changes you have

made to the lighting level.

D3313-3

SECOND

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 136 137

No comments

Raymarine 150/400 Installation Manual Page 27