Raymarine SeaTalk2 Setup Guide download pdf (Page 43)

Chapter 3: Commissioning & Setup 35

Entering Dealer calibration

Enter Dealer calibration as follows:

1. Ensure the SPX-5 Sport system is in Standby mode.

2. Hold down

standby

for two seconds to enter the Calibration mode.

3. When the screen shows

DISPLAY CAL

, press

disp

until the

DEALER CAL

screen

is displayed.

4. Press

auto

. The display will change to

CAL

5. Press -1 and +1 together to enter Dealer calibration.

6. In Dealer calibration, access the vessel type screen, using

disp

if necessary. The

vessel type screen shows either

VESSEL

or one of the vessel types (

DISPLACE,

SEMI DISPLACE, PLANING, STERN DRV, WORK BOAT or SAIL BOAT

Setting the vessel type

The vessel type setting automatically determines appropriate default values for

various other calibration settings. Some of these settings are checked later in this

procedure and others should not require any adjustment. The default values for each

vessel type are listed on

page 58

Rudder ref

fitted

Enter

DEALER

CALIBRATION

Leave

CAL screen CAL screen

Yes

Setup map

D10807-1

DEALER

CALIBRATION

At the CAL ? screen, press + together to enter DEALER CAL

2 sec

-1 +1

D10540-1

87076_1.book Page 35 Monday, March 10, 2008 2:57 PM

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 73 74

Comments to this Manuals

No comments

Raymarine SeaTalk2 Setup Guide Page 43

Comments to this Manuals

Related products and manuals for Navigators Raymarine SeaTalk2