Raymarine ST60 Installation Manual download pdf (Page 19)

Chapter 2: Maintenance and Fault Finding 7

Chapter 2: Maintenance and Fault Finding

2.1 Maintenance

Servicing and safety

• Raymarine equipment should be serviced only by authorised

Raymarine service engineers. There are no user-serviceable parts in

any Raymarine product.

• Some products generate high voltages, and so never handle the

cables/connectors when power is being applied to the equipment.

• Always report any EMC related problem to your nearest

Raymarine dealer. We will use any such information to improve

our quality standards.

When requesting service, please quote equipment Type, Model

Number and, if possible, Software Release Issue. The Software

Release Issue can be ascertained by means of the Intermediate

Calibration facility, see Chapter 4, Calibration.

Instrument

Certain atmospheric conditions may cause condensation to form on

the instrument window. This will not harm the instrument and can be

cleared by increasing the illumination setting to Level 3.

Periodically clean your ST60 instrument with a soft damp cloth. Do

NOT use chemical and abrasive materials to clean the instrument.

Transducer

If the windvane is removed from its mounting block for any reason

(e.g. if the mast is stepped), fit the blanking cover (supplied) to the

windvane mounting block connector.

Cabling

Examine all cables for chafing or other damage to the outer shield and,

where necessary, replace and re-secure.

105_3c02.p65 06/04/01, 10:477

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

No comments

Raymarine ST60 Installation Manual Page 19