Raymarine ST60 Installation Manual download pdf (Page 35)

Chapter 3: Installation

To fit a power cable:

1. Run the cable from the instrument to a suitable 12 V dc power

source.

Power connections for stand-alone instrument

12 V dc

supply

3 A over-current

circuit breaker

Red

Screen

D4310-4

2. If the cable has not already been trimmed at the power supply end:

a. Cut the cable to length and trim back an appropriate amount

of the outer sheath.

b. Cut back and insulate the yellow wire.

3. Connect the screen to the power supply 0 v terminal.

4. Connect the red wire via a 3 A over-current circuit breaker to the

power supply +12 V terminal.

105_3c03.p65 06/04/01, 10:4723

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

No comments

Raymarine ST60 Installation Manual Page 35